Instructions SiBE01-829
30 Operation Manual
2.2 AUTO • DRY • COOL • HEAT • FAN Operation
10
OPERATION
AUTO · DRY · COOL · HEAT · FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with
the same operation mode.
To start operation
1. Press “MODE selector button” and
select a operation mode.
• Each pressing of the button advances the mode
setting in sequence.
: COOL
:DRY
:FAN
:HEAT
:AUTO
2. Press “ON/OFF button”.
• The OPERATION lamp lights up.
To stop operation
3. Press “ON/OFF button” again.
• Then OPERATION lamp goes off.
To change the temperature setting
4. Press “TEMPERATURE adjustment button”.
• If you want to change the temperature unit (˚
C ˚F), press “ ” and “ ” simultaneously.
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable.
Press “ ” to raise the temperature and press
“ ” to lower the temperature.
Set to the temperature you like.
MODE
SLEEP
SET
CLR
ON TIMER
CLR
SET
OFF TIMER
OFF
ON
PM
AM
˚
C
û
F
AUTO
P1
P2
1
5
4
2, 3
˚
C
û
F
⇔
To Next Page
Loading...
Need help?
General
