6 | Operation
User reference guide
21
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
6 Operation
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
6.1 Operation range
Use the system in the following temperature and humidity ranges for safe and
effective operation.
CVXM, FVXM
Cooling and drying
(a)(b)
Heating
(a)
Indoor temperature 18~32°C DB
14~23°CWB
10~30°CDB
Indoor humidity ≤80%
(b)
—
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
FVXTM
Cooling and drying
(a)(b)
Heating
(a)
Indoor temperature 18~32°C DB
14~23°CWB
10~30°CDB
Indoor humidity ≤80%
(b)
—
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
6.2 When to use which feature
You can use the following table to determine which features to use:
Feature Tasks
Basic features
Operation modes and
temperature
To start/stop the system and to set the
temperature:
▪ In Heating and Cooling mode, heat up or cool
down a room.
▪ In Fan only mode, blow air in a room without
heating or cooling.
▪ In Drying mode, decrease the humidity in a
room.
▪ In Automatic mode, an appropriate operation
mode is automatically selected based on the
set temperature.