Daikin FVXM35A3V1B9 User Manual

6 | Operation
User reference guide
23
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
Setting Description
Automatic
The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
Drying
The system decreases the humidity in a room.
Heating
The system heats up a room to the temperature
setpoint.
Cooling
The system cools down a room to the
temperature setpoint.
Fan
The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
Additional info:
▪ Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪ Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
6.3.1 To start/stop operation mode and to set the temperature
: Unit is operating
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Cooling
: Operation mode = Heating
: Operation mode = Fan only
: Shows the set temperature.
1 Press one or more times to select the operation mode.
Result: The mode will be set as follows:
2 Press to start operation.
Result: is displayed on the LCD. The Daikin eye indication lamp changes
colour according to the operation. See "4.1.1 Daikin eye indication
lamp"[414].
3 Press or one or more times to lower or raise the temperature.
Cooling operation Heating operation Automatic
operation
Drying or Fan only
operation
18~32°C 10~30°C 18~30°C —
Note: When using drying or fan only mode, you cannot adjust the temperature.

Daikin FVXM35A3V1B9 Specifications

General

Brand	Daikin
Model	FVXM35A3V1B9
Category	Air Conditioner
Language	English