8 | Maintenance and service
User reference guide
48
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
8.3 To clean the front panel
WARNING
Do NOT let the indoor unit get wet. Possible consequence: Electrical shock or fire.
NOTICE
▪ Do NOT use gasoline, benzene, thinner polishing powder or liquid insecticide.
Possible consequence: Discoloration and deformation.
▪ Do NOT use water or air of 50°C or higher. Possible consequence: Discoloration
and deformation.
▪ Do NOT scrub firmly when washing the blade with water. Possible consequence:
The surface sealing peels off.
You can remove the front panel to clean it.
CAUTION
Be careful when opening and handling the front panel; sharp edge of the front panel
may cause injury.
1 Slide both sliders in the direction of the arrows until they click.
2 Open the front panel and undo the string.
3 Remove the front panel.
4 Wipe it with a soft cloth soaked in water.
5 Let it dry in the shade after washing.
6 To reinstall and close the front panel, see "8.10 To re-install the front
panel"[451].
8.4 About the air filters
Operating the unit with dirty filters means that the filter:
▪ CANNOT deodorise the air,
▪ CANNOT clean the air,