5 | Operation
Installer and user reference guide
16
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
Condition Action
The system is composed of ONLY heat
reclaim ventilation units.
Change the ventilation rate
INFORMATION
▪ Depending on configuration, the home screen displays the setpoint either as a
numerical value, or as a symbol. For more information, see "About the
setpoint"[423].
▪ In case the home screen displays the setpoint as a symbol, then it will only display
the status icons of the standard home screen mode, even when the controller is
in detailed home screen mode.
INFORMATION
The controller is equipped with a power saving function that causes the screen to go
blank after a period of inactivity. To make the screen light up again, press one of the
buttons.
5.1.2 Main menu
From the home screen, press to enter the main menu. Use and to cycle
through the menus. Press again to enter one of the menus.
Menu Description
Operation mode. Set the operation mode.
Date and time. Make date and time settings.
Airflow direction. Set the indoor unit airflow direction.
Fan speed. Set the indoor unit fan speed.
Ventilation mode. Set the ventilation operation mode.
Ventilation rate. Set the fan speed for ventilation operation.
Bluetooth. Activate Bluetooth to control the system with the
Madoka Assistant app, and/or to perform a remote controller
software update.
To Next Page
Loading...
Need help?
General
