5 | Operation
Installer and user reference guide
25
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12
5.3.2 To set the setpoint
Prerequisite: The active operation mode is either 'Cooling', 'Heating', or 'Auto'.
1 In the home screen, use and to adjust the setpoint.
Result: The indoor unit changes its temperature setpoint.
5.4 Date and time
Set the date and time for the indoor units connected to the controller.
5.4.1 About date and time
Depending on daylight saving time settings, the date and time menu has the
following daylight saving time indicators:
Summer time
Winter time
For more information, see "Indoor unit field settings" [4 69] (remote controller
settings) and "Date and time"[4104] (app settings).
5.4.2 To set date and time
1 Navigate to the date and time menu.
2 Press to activate .
Result: The fields become editable.
3 Set the date and time. Set with and . Confirm with . Cycle through the
menu until all fields are set correctly.
Result: You set the date and the time.
To Next Page
Loading...
Need help?
General
