Advanced Settings
22
English
Press to change the setting*.
Each press cycles between Normal and Low.
Normal
Low
Streamer operation condition
FAN/MODE setting
Streamer output
setting
Normal Low
FAN
Turbo ON
Standard ON-OFF*
Quiet, Low ON-OFF*
OFF
MODE
AUTO FAN,
PET,
CIRCULATOR
ON-OFF*
ECONO
ON-OFF* OFF
* The Streamer operation status ON-OFF
means that the Streamer turns ON and OFF
automatically depending on the degree of air
impurity and FAN setting.
About the Streamer lamp
When the setting condition of Streamer is
ON–OFF or ON, it is always lit up. (However,
it is unlit during Monitoring mode).
It is unlit when the setting condition of
Streamer is OFF.
Press .
A short beep sounds with the PET
MODE lamp blinking while the FAN
lamp blinks according to the new
setting.
Blinking
Normal Low
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply
plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered even
if the unit is unplugged.
234
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the
power supply plug and repeat the above procedure from the beginning.
To Next Page
Loading...
