Advanced Settings
23
Active Plasma Ion
output (ON/OFF)
Setting at time of
purchase: ON
If the odour of ozone bothers
you, set Active Plasma Ion
output to OFF.
• If turned off, Active Plasma
Ion is not discharged but dust
and odour can be removed.
• If the odour of ozone
continues to bother you even
after output has been set to
OFF, set Streamer output to
Low.
Can be performed either during
operation or while operation is
stopped.
Hold down
for about 5 seconds
and when a short beep sounds, press
while continuing to hold
down .
Release both
and when a
short beep sounds.
CIRCULATOR MODE lamp will light up after
blinking.
Blinking Lit up
According to the current setting, the FAN lamp
will turn from blinking to lit up.
ON OFF
PM2.5 sensor
sensitivity
(Low/Normal/High)
Setting at time of
purchase: Normal
PM2.5 sensor sensitivity can
be set to Low, Normal, High.
• Low means sensor is less
responsive and High means
the sensor is more
responsive.
Can be performed either during
operation or while operation is
stopped.
Press
for about 5 seconds and
when a short beep sounds, press
FAN
while continuing to hold
down .
Release both
FAN
and when a
short beep sounds.
A short beep sounds and the FAN lamp will
turn from blinking to lit up according to the
current setting.
NormalLow High
1
Changing the Setting
Function
To Next Page
Loading...
