Daikin Modular T Smart ATB - Safety Regulations

5
Safety regulations
SKILLS REQUIRED FOR THE USE AND MAINTENANCE OF THE UNIT
Generic operator: AUTHORISED to run the unit using commands placed on the keypad of the electrical control pan-
el. Performs only unit control operations, power on/o.
Maintenance mechanic (qualied): AUTHORISED to carry out maintenance, adjustments, replacement and repair
of mechanical parts. It must be a person competent in mechanical systems, therefore able to perform mechanical
maintenance in a satisfactory and safe manner, must possess theoretical preparation and manual experience. NOT
AUTHORISED to work on electrical systems.
Manufacturer's technician (qualied): AUTHORISED to perform complicated operations in every situation.
Operates in accordance with the user.
Maintenance electrician (qualied): AUTHORISED to perform service of an electric nature, adjustments,
maintenance and electrical repairs. AUTHORISED to operate in the presence of an active electrical connection inside
the control panels and junction boxes. It must be a person competent in electronics and electrical engineering,
therefore able to work on electrical systems satisfactorily and safely, must possess theoretical knowledge and proven
experience. NOT AUTHORISED to work on mechanical systems.
SKILLS REQUIRED FOR THE INSTALLATION OF THE UNIT
Installers must perform operations according to their professional qualications: all activities not within one's expertise
(i.e. electrical connections) must be carried out by specialised and qualied sta so as not to endanger one's safety and
the safety of the other operators interacting with the unit.
Equipment transport and handling operator: authorised person with recognised expertise in using transport and
lifting equipment.
Technical installer: expert technician, sent or authorized by the manufacturer or its representative, with adequate
skills and training to install the unit.
Assistant: technician subject to care obligations while lifting and assembling the equipment. He must be suitably
trained and informed about the operations to perform and the safety plans of the site/installation location.
In this manual, the technician competent to carry out each operation is specied.
Installers, users and maintenance technicians CANNOT work on the unit if they:
• are without experience and responsibility or minors;
• are in inadequate psycho-physical conditions;
• do not master the operating cycle of the unit;
• have not attended theoretical/practical training alongside an expert unit operator or user, or along-
side a Manufacturer’s technician.
In this manual, the technician competent to carry out each operation is specied.