Daikin R32 Split Series Installer's Reference Guide

10 | Configuration
Installer reference guide
70
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680077-1 – 2021.11
10.6.2 Tank
Overview
The following items are listed in the submenu:
5
Tank
User settings
Malfunctioning
Operation
Information
[5] Tank
Setpoint screen
[5.1] Powerful operation
[5.2] Comfort setpoint
[5.3] Eco setpoint
[5.4] Reheat setpoint
[5.5] Schedule
[5.6] Heat up mode
[5.7] Disinfection
[5.8] Maximum
[5.9] Hysteresis
[5.A] Hysteresis
[5.B] Setpoint mode
[5.C] WD curve
[5.D] Margin
[5.E] WD curve type
[5.F] Priority schedule
[5.G] Operation mode
[5.H] Quick mode timer
Tank setpoint screen
You can set the domestic hot water temperature using the setpoint screen. For
more information about how to do this, see "10.3.5Setpoint screen"[458].
Powerful operation
You can use powerful operation to immediately start heating up the water to the
preset value (Comfort setpoint). This activates both heat pump and electrical
booster heater, which results in extra energy consumption. If powerful operation is
active, will be shown on the home screen.
To activate powerful operation
Activate or deactivate Powerful operation as follows:
1 Go to [5.1]: Tank > Powerful operation
2 Turn powerful operation Off or On.
Usage example: You immediately need more hot water
If you are in the following situation:
▪ You already consumed most of your hot water.
▪ You cannot wait for the next scheduled action to heat up the storage tank.
Then you can activate DHW powerful operation.
Advantage: The storage tank is immediately heated up to the Comfort
setpoint.

Daikin R32 Split Series Specifications

General

Brand	Daikin
Model	R32 Split Series
Category	Air Conditioner
Language	English