Daikin R32 Split Series - Installer Settings

10 | Configuration
Installer reference guide
82
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680077-1 – 2021.11
Reset
Reset the configuration settings stored in the MMI (user interface of the indoor
unit).
Example: Holiday settings.
INFORMATION
This does not reset the configuration settings and field settings of the indoor unit.
# Code Description
[8.A] N/A Reset the MMI EEPROM
to factory default
Possible read-out information
In menu… You can read out…
[8.2] Malfunction history Malfunction history
[8.3] Dealer information Contact/helpdesk number
[8.4] Sensors Outdoor temperature, Tank
temperature.
[8.5] Actuators Status/mode of each actuator
Booster heater
[8.6] Operation modes Current operation mode
Example: Defrost/oil return mode
[8.7] About Version information about the system
[8.8] Connection status Information about the connection
status of the unit, the room thermostat
and WLAN.
[8.9] Running hours Running hours of specific system
components
10.6.5 Installer settings
Overview
The following items are listed in the submenu:
9
Installer settings
Commissioning
Information
User settings
User profile
[9] Installer settings
[9.1] Configuration wizard
[9.4] Booster heater
[9.5] Emergency
[9.9] Power consumption control
[9.E] Auto restart
[9.F] Power saving function
[9.G] Disable protections
[9.I] Overview field settings
[9.N] Export MMI settings