Daikin R35DV1 - Page 166

Si01-501 FT09/13DV2S, FT25/35DVM, FT25/35DSG
Removal Procedure 157
Step Procedure Points
5
6
7
8
Remove the connector
of the fan motor [S7].
Remove the drip proof
plate by removing the
screw.
Replace the heat
exchanger thermistor.
Disconnect the earth
wire by removing the
screw.

In case of FT09DV2S, FT25/
35DVM and FT25DSG.

Put any excess wires behind
the power supply lead wire.

Use care not to lose the
retainer of thermistor.
Retainer of
thermistor
Heat exchanger
thermistor