Daikin R35DV1 - Page 167

FT09/13DV2S, FT25/35DVM, FT25/35DSG Si01-501
158 Removal Procedure
Step Procedure Points
9
10
11
12
Remove the screw of
the electrical box.
Release the hook at the
upper far side by
pressing it from above
and pulling the box
toward yourself.
Lift up the electrical box
and pull it toward
yourself.
When the connector of
the fan motor [S1] is
removed, the electrical
box can be dismounted.

There is a hook also at the
lower part of the back. When
mounting the box, make
sure that it is securely
fastened.