Daikin RMKD112DVM - Page 13

Si18-797 Outdoor Unit
Removal Procedure 11
2
Open the mounting
plate's right side toward
yourself.
3
Remove the 2 clamps
from behind the
mounting plate.
4
Disconnect the
connectors from the
power filter PCB and
cut off the clamps.
Earth / ground, Power terminals
NA (white) / LA (red) / X1A
(black)
The clamps are to be kept in
stock.
5
Lift the mounting plate
and undo the 2 left side
hooks to remove it.
Step
Procedure Points
Clamps
(Q0526)
Earth / ground NA LA X1A
(Q0469)
Hooks
(Q0470)