Removal of Thermistor Assembly Si00-777
28 Removal Procedure
5
Pull out the outdoor
heat exchanger
thermistor.
Be careful not to loose the
clip for the thermistor.
6
Remove the sound
blanket (top).
Since the piping ports on
the sound blanket are torn
easily, remove the blanket
carefully.
7
Release the discharge
pipe thermistor.
Detach the discharge pipe
thermistor while opening the
thermistor fixing clip.
Be careful not to loose the
clip for the discharge pipe
thermistor.
Meet the edge of the
thermistor and the clip when
reassembling.
Step Procedure Points
(R5879)
(R14055)
Sound blanket (top)
(R5880)
To Next Page
Loading...
