Si001169 Removal of Outer Panels (Pattern 2)
Removal Procedure 11
2. Removal of Outer Panels (Pattern 2)
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1. Appearance features.
The design of discharge
grille is different depending
on the model.
2. Remove the suction grille.
The hooks are secured in
the clearances of the
outdoor heat exchanger fins.
1
Unfasten the 3 hooks at
the upper first, and then
3 hooks at the middle.
2
Unfasten the 3 hooks at
the bottom and remove
the suction grille.
3. Remove the top panel.
1
Remove the 9 screws
and remove the top
panel.
(R16618)
(R16619)
Suction grille
(R9587)
(R16620)
Top panel
To Next Page
Loading...
Need help?
General
