Daikin SiBE041010 - Page 126

Indoor Unit SiBE041010
116 Removal Procedure
5
Disconnect the flare nut
for liquid piping with 2
wrenches.
2. Remove the indoor unit.

When the pipings are
disconnected, protect the
both openings from entering
moisture.
1
Remove the indoor unit
from the installation
plate.
2
Unfasten the hook of
the piping fixture on the
back of the unit.
Step Procedure Points
(R8018)
Gas piping
Liquid piping
(R8019)
Auxiliary piping
Piping fixture
(R8038)
(R8039)