SiBE18-821_C RA Indoor Unit
Operation Manual 211
Notes on “COMFORT AIRFLOW Operation”
Notes on “INTELLIGENT EYE Operation”
Cooling operation Heating operation
90˚
55˚ 55˚
5m
5m
Area 1 Area 2
Area 1 Area 2
Area 1 Area 2
A person is detected in
area 1.
A person is detected in
area 2.
The air conditioner will go into
energy-saving mode after 20 minutes.
People are detected in
both areas.
No people are detected in
the areas.
(Use the INTELLIGENT EYE
Operation in combination with the
COMFORT AIRFLOW Operation.)
* The wind direction may differ from the
illustrated direction depending on the actions
and movements of the people in the areas.
•
The flap position will change, preventing air from blowing directly on the occupants of the room.
•
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
• The volume of air will be set to AUTO. If the upward and downward airflow direction is
selected, the COMFORT AIRFLOW function will be canceled.
• Priority is given to the function of whichever button is pressed last.
• The COMFORT AIRFLOW function makes the following airflow direction adjustments.
The flaps will move upward while cooling so that the airflow will be directed upward.
The flaps will move downward while heating so that the airflow will be directed downward.
Vertical angle 90˚
(Side View)
Horizontal angle 110˚
(Top View)
• The INTELLIGENT EYE sensor according to the following situations.
To Next Page
Loading...
Need help?
General
