Daktronics VIP-5000 Series - Firmware, Storage, Memory, and Brightness Status; Peripheral, Power Control, Input, Output, and Monitor Status

Dashboard
8
• Memory - This tile shows how much memory is currently being used and how much is
available on the processor.
• Brightness - This tile shows brightness settings and current output. The Congured
information shows how the brightness is determined and the brightness value that
the processor is attempting to achieve. The Current information shows the actual
brightness settings in use. Click this tile to open Brightness under the Conguration
menu.
• Peripherals - This tile provides information about any associated peripheral device(s).
If more than one peripheral device is congured, the tile contains more than one
page of information. Refer to the Peripherals tile in Figure 8. Click an open circle at
the bottom of the tile to open information about another peripheral device. Click the
tile itself to open Peripherals under the Conguration menu.
• Power Relay Control - This tile provides information about the power relay controls
that were congured under Conguration>Peripherals. Click this tile to open Power
Control under the Troubleshooting menu.
• Input - This tile provides details about the type of display input (Display Mode) that
is currently being received by the display. Click this tile to open Input under the
Conguration menu.
• Output - This tile shows whether or not the display output state is currently active or
inactive along with the display dimensions. Click this tile to open Output under the
Conguration menu.
• Monitor - This tile shows a thumbnail of the current display input or output. The content
shown in this thumbnail is not a live video feed. Click this tile to open the Monitor
menu. Refer to Section 5: Monitor (p.36). The image is shown for the length of time
as dened under the Right-side menu > Settings > Monitoring Settings > Limit; refer to
Settings (p.4).