Daktronics VIP-5000 Series - Password, Security, and Legacy Access

User Interface Basics
5
Password Rules
Turn this option On to enforce the following password rules:
• Passwords must be at least eight characters in length and contain at least three of
the following four elements: special characters, letters, numbers, combination of
upper-case and lower-case letters.
• Passwords can be changed only once per day.
• Passwords must be changed every 90 days.
• Passwords cannot match any previously used 24 passwords.
Note: The default setting for the password rules is Off.
SSL Server
Turn this option On to enable a secure internet connection over an https port. When
enabled, this feature uses a self-signed certicate. The default setting for the SSL Server is
Off.
Note: Enabling SSL disables communication with IDM or Venus
®
Control Suite.
Password
Password enables the user to change their password.
Password requirements depend on how the Password
Rules are congured under Settings. Refer to Password
Rules (p.5) and Figure 6 and Figure 7.
Enter the new password and conrm the change.
Click Save to save the changed password. Click
Cancel to close the Password window without saving
the new password and return to the dashboard. After
a new password is saved, the user is logged out and
returned to the login prompt. Log in again using the
new password.
Help
Help downloads a PDF version of this manual.
About
About opens a window with a link to the
Daktronics website and the Daktronics customer
support number. Click Open Source attributions
for a listing of the open source libraries/licenses
used to build the VIP-5000 series processor.
Legacy
Legacy opens the previous version of the VIP
user interface in a new browser window. Within
the legacy interface, click the help button
in the upper-left corner to access the legacy
interface’s manual.
Figure 6: Password
Figure 7: Password with Rules Enabled