65
2-6 Cycle counters
This menu allows to display the
counters of the working cycles
of each electromechanical com-
ponent in the machine.
• Push (PD3) to access this menu.
• Use (PD1) and (PD2) to scroll
through all the counters of the
main units.
• After getting the needed info,
push ESC to go back to the INFO
Menu.
2-7 Grinder (GCS)
This menu allows to see if connec-
tion to grinder(s) works properly.
• Push (PD3) to access this menu.
• At the end, push ESC to go back
to the INFO Menu.
To Next Page
Loading...
