66
2-8 Matricola
This menu allows to display the
machine serial code, which must
correspond to the serial number
of the identification plate.
• Push (PD3) to access this menu.
• After getting the needed info, push
ESC to go back to the INFO Menu.
2-9 Firmware release
This menu allows to display the
firmware installed in the elect-
ronic control of the machine.
• Push (PD3) to access this menu.
• After getting the needed info, push
ESC to go back to the INFO Menu.
WARNING
This datum is important for the
Technical Service and allows to
understand if machine firmwa-
re needs to be updated with a
new version distributed by the
manufacturer.
To Next Page
Loading...
