EasyManua.ls Logo

dallara F-312 - Front and Rear Upright

dallara F-312
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F 317
Euroformula Open Technical Comision
Comisión Técnica del Euroformula Open
40/78
Version 1801 of April 2018
Versión 1801 de Abril de 2018
FRONT AND REAR UPRIGHT
MANGUETAS DELANTERA Y TRASERA
➢ On the front upright, both the Ackermann
arm and lower wishbone bracket are
supposed to be fitted directly to the upright
with no spacers.
➢ The uprights are homologated parts and
cannot be modified. The homologation
includes the studs for the Ackermann arm
and the lower wishbone bracket. Obviously
also the hub is homologated.
➢ En La mangueta delantera, tanto el brazo
Ackermann como el soporte de montaje del
triángulo inferior se han de montar
directamente sobre la mangueta, sin ningún
tipo de separador.
➢ Las manguetas son piezas homologadas y
NO puede modificarse ninguna de sus
piezas.

Table of Contents