DF3000A(-DN) / DF3000AS(-DN)
17Dallmeier electronic
¾ Connect the video output (G) via video cable (coaxial) to the monitor.
WARNING
Danger of death from electric shock!
Disconnect the power supply unit from the mains socket before
connecting the camera.
IMPORTANT
Possible damage to the camera caused by an inadequate po-
wer supply unit.
If used in North America, you must use a UL-certified, limited-
power Class 2 power supply unit (12V DC / 0.42A or 24V AC /
0.20A).
NOTE
The camera is provided with internal inverse-polarity protection.
¾ Connect the camera via power input terminal (E) to an appropriate power supply unit.
¾ Connect the power supply unit to the mains socket.
The power LED (H) illuminates and the camera is ready for operation.
To Next Page
Loading...
