dallmeier DF3000A-DN - Horizontal Flip; Lens Select

DF3000A(-DN) / DF3000AS(-DN)
24Dallmeier electronic
NOTE
The Sync = AC-Linelock function is not supported by the
DF3000A(-DN) operating at 12V DC and the DF3000AS(-DN).
NOTE
Flickerfree Linelock is recommended if cameras without
Linelock that are operated with a mains frequency of 50 Hz
must be enhanced for scenarios with neon tubes.
z V-Phase
After selecting the video level and synchronization you can adjust the V-Phase, if
necessary.
NOTE
The V-Phase function is not supported by the DF3000A(-DN)
operating at 12V DC and the DF3000AS(-DN).
8.3.3 Horizontal Flip
Set Horizontal Flip = On to horizontally flip the image.
This setting is necessary to obtain an accurate-to-side
presentation of the image if recording occurs via a mirror.
8.3.4 Lens Select
¾ Choose Manual for lenses with manual iris control or DC
for auto iris lenses.
NOTE
Lens Select = DC is set by default.
Only change this setting if the camera is used with a
subsequently mounted lens with manual iris control.
---------Basic Functions ---------
Previous Page.
Camera ID.
CCTV System PAL..
> Horizontal Flip < On >
Lens Select.. DC
Color On
Day / Night Setup..
---------Basic Functions ---------
Previous Page.
Camera ID.
CCTV System PAL..
Horizontal Flip On
> Lens Select.. < DC >
Color On
Day / Night Setup..