8 • Genie Nano Series Overview Nano Series GigE Vision Camera
Optional Hardware Accessories
Nano Accessories Order Number
Mounting Bracket Plate
(2 or 3 screw camera mount),
with ¼ inch external device screw mount
(also known as a tripod mount)
G3-AMNT-BRA01
Components Express, Inc.
Machine Vision Camera Enclosure designed for
IP67 protection of Nano Series cameras.
See: IP67 Protection
Enclosure Designed
for Nano
Nano XL series Accessories Order Number
NanoXL — M42 to F-mount (Nikon) adapter
(same adapter part as used with Genie TS)
Note that there is no support for Nikon lens
features such as focus and aperture motor
controls.
G2-AM42-MOUNT4
IR Cut-off Filter for Nano XL models:
M42 mount camera filter designed by Midopt to
thread directly into our M42-mount camera
between lens and sensor.
G3-AM42-SP644IF
Heatsink for Nano XL models
51mm x 28mm x 15mm (screws included)
G3-AHSK-51X28
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
To Next Page
Loading...
