EasyManua.ls Logo

Dalsa G3-GM11-M2420 - Specifications: M2590, M2590-NIR, C2590

Default Icon
327 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Nano Series GigE Vision Camera On-Semi Sensor Models 75
Specifications: M2590, M2590-NIR, C2590
Supported Features M2590, M2590-NIR Nano-C2590
Resolution 2592 x 2048
Sensor OnSemi Python5000 P1 (5.1M)
Pixel Size 4.8 µm x 4.8 µm
Shutter type Full frame electronic global shutter function
Full Well charge 10ke (max)
Firmware option
(Field programmable)
Standard Design
Monochrome
(factory default)
Standard Design
Bayer
(factory default)
RGB-Output
Design
Max. Internal Frame Rate
Full Resolution (2592 x 2048)
51.8 fps (Fast Readout Enable)
24.7 fps (Normal Readout Enable)
Maximum Sustained Frame Rate
Output (with TurboDrive v1)*
42.7 fps (8-bit)
24.9 fps (10-bit)
N/A
Maximum Sustained Frame Rate
Output (without TurboDrive)
22 fps (8-bit)
5.5 fps (RGBA)
8.7 fps (RGB)
11 fps (Yuv422)
22 fps (8-bit mono)
Pixel Data Formats
Mono 8-bit
Mono 10-bit
Bayer 8-Bit
Bayer 10-Bit
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
8 µs if exposureAlignment = Synchronous With No Overlap
between the new exposure and the previous readout
26.2 µs if exposureAlignment = Synchronous With Overlap
between the new exposure and the previous readout
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
3 µs
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Up to 1 line time
Trigger to Exposure Start jitter
(Reset Exposure Alignment)
0 µs
Exposure Time Minimum
(see “exposureTimeActual” in
Sensor Control)
87 µs
(increment steps of 1µs)
Min. Time from End of Exposure to
Start of Next Exposure (second
frame)
49 µs Normal Readout
47 µs Fast Readout
Horizontal Line Time:
11.33 µs Normal Readout
9.33 µs Fast Readout
Readout Time
23242 µs Normal Readout for 2592 x 2048
Add 76µs when overlapping Exposure and Readout
19142 µs µs Fast Readout for 2592 x 2048
Add 64µs when overlapping Exposure and Readout
Specifically: ( Horizontal line time at current resolution * number of lines ) + (3
* ( line time of the 2590 model ))
Auto-Brightness Yes , with Auto-Exposure and AGC (FPGA Gain)
Black offset control Yes (in DN)

Table of Contents

Related product manuals