R70 operation and configuration d&b audiotechnik GmbH
LAN Parameters
In the "LAN Parameters" tab, the settings of the R70 can be modified to
the on site conditions of the local area network.
When more than one R70 is used, each one must have a unique IP
address and host name.
The settings below can be assigned automatically if the on site network
supports this capability. Otherwise please consult the responsible
network administrator for the appropriate IP settings.
Host Name
Name to identify the R70 within a
network. This name must be unique.
IP Address
Unique IP address according to "IP v4
Standard".
Subnet Mask
Corresponding subnet mask
Obtain an IP address
automatically
Enable / Disable
CAN Parameters
Page 16 of 20 R70 Ethernet to CAN interface, Manual
To Next Page
Loading...