d&b audiotechnik R70 - Scope of Supply

d&b audiotechnik GmbH R70 Ethernet to CAN interface
1.3. Scope of supply
Before installation and start up please verify the shipment for
completeness and carry out a visual inspection of the packaging and
the individual items listed below for obvious damage during shipment.
NOTICE: If there are any signs of obvious damage to the items, do not
connect and operate the device.
Qty. d&b Code Description
1 Z6124
R70 Ethernet to CAN interface [1]
1
Power supply [2] including 4 x AC input plugs
specific to the following territorial regions:
Europe, UK, USA, and Australia
2 Z6116
RJ 45 M Terminator [3]
1
CD-ROM [4] containing the R70 manuals and
additional documentation (TI 312).
Additionally, the AcrobatReader® in its current
version is provided to allow the documents to be
displayed and printed.
1
Ethernet cable 2 m/6.5 ft (CAT6, 4 Pair STP) [5]
1 Additional cable clip to be used as cord grip for the
power supply.
(1.4 EN) Page 5 of 20