Danfoss Semco SEM-SAFE - Page 33

END USER MANUAL
OPERATION AND MAINTENANCE OF HIGH PRESSURE WATER MIST PUMP UNIT
REVISION 4, MAY 2016
PAGE 33 / 48
Functional description of buttons, lamps and switches placed on the unit control panel is presented
below.
Figure 20. Example of an FM Global Unit Control Panel
Button/Lamp/Switch
Description
Buzzer
Audio alarm in case of error/failure.
Unit start
Button for manual start of the unit.
Unit stop
Button for manual stop of the unit.
Main switch
Switch for turning on power supply
Emergency start handle
Handle for emergency start of the unit
Alarm and status display
Description of alarm that occurred.