EasyManua.ls Logo

Danfoss AK-CC 550 - Heating Function and Data Communication

Danfoss AK-CC 550
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AK-CC 550 Manual RS8EN502 © Danfoss 02-2010 11
Data communication
Thecontrollerhasxedbuilt-inMODBUSdatacommunication.
Ifthereisarequirementforadierentformofdata
communication,aLonRS485modulecanbeinsertedinthe
controller.
TheconnectionmustthenbetoterminalRS485.
(TouseaLonRS485moduleandgatewaytypeAKA245the
modulemustbeVersion6.20orhigher.)
Display
Thecontrollerhasoneplugforadisplay.HeredisplaytypeEKA
163BorEKA164B(max.length15m)canbeconnected.
EKA163Bisadisplayforreadings.
EKA164Bisbothforreadingsandoperation.
The connection between display and controller may be with a
cable which has a plug at both ends.
Ifthedistancebetweendisplayandcontrollerisgreaterthan15
m,theconnectionmusttakeanotherform.
An extra module must also be mounted in the controller if data
communication is used.
Thebuilt-inMODBUSdatacommunicationisusedsothatthe
display connection and the data communication to the other
controllersmusttakeplaceviaamodule.Themodulecanbe:
LonRS485orMODBUS.
Whenadisplayistobeconnectedtothebuilt-inMODBUS,the
displaycanadvantageouslybechangedtooneofthesametype,
butwithIndexA(versionwithscrewterminals).
Ifconnectionoftwodisplaysisrequired,onemustbeconnected
totheplug(max.15m)andtheothermustthenbeconnectedto
thexeddatacommunication.
Important
AllconnectionstothedatacommunicationMODBUSandRS485
must comply with the requirements for data communication
cables. See literature: RC8AC.
Override
Thecontrollercontainsanumberoffunctionswhichcanbeusedtogetherwiththeoverridefunctioninthemastergateway/system
manager.
Function via data communication Function in gateway/system manager Used parameters in AK-CC 550
Start of defrosting Defrostcontrol/Timeschedule/Defrostgroup --- Def start
Coordinated defrost Defrostcontrol/Defrostgroup ---HoldAfterDef/---DefrostState
Preventdefroststart --- Disable Def
Day/Nightschedule Day/Nightcontrol/Timeschedule/Lightzone ---Nightsetback
Lightcontrol Day/Nightcontrol/Timeschedule O39lightRemote
Forcedclosing ForcedClose/InjectionON/AKCON ---Forcedcl.
Forcedcooling ---Forcedcool
Railheatlinktodewpoint /Enhancedrailheat --- Dew point
P0optimization P0Optimization ThecontrollersupportsP0optimization
Adaptivedefrost /Adaptivedefrost.Systemmanageronly - - - Tc TempMean

Other manuals for Danfoss AK-CC 550

Related product manuals