Danfoss AK-LM 330 User Manual

AK-LM 330 Vers. 1.4x Menu operation RC8CC202 © Danfoss 09/2012 7
Display control
Measurements AK error When “ON”, the controller is in alarm condition.
Settings Main switch Main switch: ON: Regulation
OFF: Controller stopped
Display control A Set what should be read in "Display A"
Display control B Set what should be read in "Display B"
Display control C Set what should be read in "Display C"
Display control D Set what should be read in "Display D"
No reading = 0
"Thermostat 1" to be dened with setting = 1
"Thermostat 2" to be dened with setting = 2
"Thermostat 3" to be dened with setting = 3
"Thermostat 4" to be dened with setting = 4
"Thermostat 5" to be dened with setting = 5
"Thermostat 6" to be dened with setting = 6
"Thermostat 7" to be dened with setting = 7
"Thermostat 8" to be dened with setting = 8
"Thermostat 9" to be dened with setting = 9
"Thermostat 10" to be dened with setting = 10
"Pressostat 1" to be dened with setting = 11
"Pressostat 2" to be dened with setting = 12
"Pressostat 3" to be dened with setting = 13
"Pressostat 4" to be dened with setting = 14
"Pressostat 5" to be dened with setting = 15
"DI1 Alarm" to be dened with setting = 16
"DI2 Alarm" to be dened with setting = 17
"DI3 Alarm" to be dened with setting = 18
"DI4 Alarm" to be dened with setting = 19
"DI5 Alarm" to be dened with setting = 20
"DI6 Alarm" to be dened with setting = 21
"DI7 Alarm" to be dened with setting = 22
"DI8 Alarm" to be dened with setting = 23
"DI9 Alarm" to be dened with setting = 24
"DI10 Alarm" to be dened with setting = 25
"DI11 Alarm" to be dened with setting = 26
"DI12 Alarm" to be dened with setting = 27
"DI13 Alarm" to be dened with setting = 28
"DI14 Alarm" to be dened with setting = 29
"DI15 Alarm" to be dened with setting = 30
"DI16 Alarm" to be dened with setting = 31
Sensor type and calibration
Measurements AK error When “ON”, the controller is in alarm condition.
Settings Main switch Main switch: ON: Regulation
OFF: Controller stopped
Saux 1 oset Correction of the signal from the sensor "Saux 1" if necessary
2,3,4,5,6,7,8 Do for Saux 2,3,4,5,6,7,8
Paux 1 oset Correction of the signal from the pressure transmitter "Paux 1" if necessary
Paux 2 oset Correction of the signal from the pressure transmitter "Paux 2" if necessary
Saux 1 sensor type Denition of the sensor type for the input "Saux 1"
Pt 1000 ohm dened with setting = 0
PTC 1000 ohm dened with setting = 2
2,3,4,5,6,7,8 Do for Saux 2,3,4,5,6,7,8
Paux 1 sensor type Denition of pressure transmitter type and pressure area for "Paux 1"
AKS 32 -6 dened with setting = 1
AKS 32 -9 dened with setting = 4
AKS 32 -12 dened with setting = 7

Danfoss AK-LM 330 Specifications

General

Brand	Danfoss
Model	AK-LM 330
Category	Measuring Instruments
Language	English