1 Functional Overview
Symbols Function description Symbols Function description
SET
M
<
>
Room temperature Away mode
Floor temperature Child safety lock
Temperature indication Power ON/OFF
Set temperature
Timer and program
operation
Floor heating, Active
M
Mode change/check oor
temp./child safety lock/
parameters setting
Frost protection, Active
< >
Up/down selectors
2 Power ON/OFF
Turn the thermostat ON or OFF by pressing .
3 Setting the Temperature
• Press < or > at any time to change the desired temperature value. SET is shown in the display.
• When releasing < or >, the display returns to showing the actual temperature.
• The adjustment step is 0.5° C.
4 Select Away Mode
• Press M to enter Away mode and will be displayed.
• Press < or >. SET appears; set the Away mode setpoint.
• Press M again to exit Away mode.
5 Set Timer (only for WT-P and WT-PR types)
• Press ; hh ashes. Press < or > to adjust hour.
• Press again; mm ashes. Press < or > to adjust minute.
• Press again; week ashes. Press < or > to adjust week.
• Complete all adjustments. Press any button to exit (automatic exit after 6 seconds with no operation).
6 Advanced Programmable Timer (only for WT-P and WT-PR types)
The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic
comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is
not required.
To Next Page
Loading...
