DEVIreg™ Opti
23Installation Guide
screw driver (insert all the way in and twist). It will be possi-
ble to set the maximum floor temperature up to 45°. Further-
more, it will be possible to use only a room sensor. However,
this option is not recommendable due to an increased risk of
overheating the floor.
Note: Please contact the floor supplier before changing the
maximum floor temperature and be aware of the following:
• The floor temperature is measured there, where the
sensor is placed.
• The temperature of the bottom of a wooden floor can
be up to 10˚C higher than the top.
• Floor manufactures often specify the max. tempera-
ture on the top surface of the floor.
To Next Page
Loading...
Need help?
General
