DEVIreg™ Opti
Installation Guide8
Always install the thermostat at least 50 cm from
windows and doors, due to draft, when using
regulation in: floor and room mode or room
alone mode.
Do not place the thermostat in a way that it will
be exposed to direct sunlight.
Note: A floor sensor is recommended in all floor
heating applications and mandatory to thin
matsand under wooden floors to reduce the risk
of overheating the floor.
• Place the floor sensor
in a protecting plastic
conduit in the floor
construction in an ap-
propriate place, where
the floor is not exposed
to sunlight or draft
from door openings.
• Equally distant and >2 cm from the heating cables on
both sides.
≥
To Next Page
Loading...
Need help?
General
