Danfoss ECtemp Smart - Con Guring

Danfoss ECtemp™ Smart
Installation Guide18
6 Conguring
Download App
Download the Danfoss Smart™ App from App
Store or Google Play or http://heating.danfoss.com/
new-solutions/ectemp-smart.
Find WiFi name and password for the WiFi
network, that you would like to connect your
thermostat to. If in doubt contact network
administrator or internet service provider.
Identify your oor sensor type ( in kOhm).
Identify your installed heating output (in W),
from label on the heating element.
Power on the thermostat, and it will show “-“
in the display. Then it is ready to be congured using your
iPhone and Android device.
Open the Danfoss Smart™ App and follow the instructions
and set-up ow in the App.
Danfoss ECtemp™ Smart indication
The Danfoss ECtemp™ Smart shows “–” indicating that power
is ON, but still need to be congured.