Danfoss ECtemp Smart - Page 20

Danfoss ECtemp™ Smart
Installation Guide20
IMPORTANT: When the thermostat is used to control a
oor heating element in connection with a wooden oor
or similar material, always use a oor sensor and never set
the maximum oor temperature to more than 35°C.
Note: Please contact the oor supplier before changing
the maximum oor temperature and be aware of the
following:
• The oor temperature is measured there, where the
sensor is placed.
• The temperature of the bottom of a wooden oor
can be up to 10˚C higher than the top.
• Floor manufactures often specify the max. tempera-
ture on the top surface of the oor.