Danfoss ECtemp Touch

Danfoss ECtemp Touch
13Installation Guide
12. Use the < and > arrows to
select whether the timer
should be activated or not.
Press to conrm and end
the initial thermostat setup.
Skip Step 13.
13. Enter your web-generated
code. Then press to end
the initial thermostat setup.
If no check mark ( )
appears, the hexacode is
incorrect.
3�2 Forecast
The forecast feature is used when you switch between
economy temperature and comfort temperature. If forecast
is turned on, heating will start so that the requested tem-
perature is reached at the specied time.
For example, if your comfort temperature is set to 22°C and
the comfort period starts at 6.00 o’clock am, heating will
start before 6 o’clock so that your room temperature will be
22°C at 6 o’clock. If forecast is turned o, heating will not
start until 6 o’clock and it will take a while to reach a room
temperature of 22°C.
The forecast feature also optimises heating stop when switch-
ing from comfort temperature to economy temperature.