Danfoss ECtemp Touch User Manual

Danfoss ECtemp Touch
15Installation Guide
3�3 Window Open
How to turn “window open detection” on or o
1. Touch the thermostat display
to activate it, then press
menu.
2. Press SETTINGS in the bottom
right corner of the menu. Then
press OPTIONS.
3. Press WINDOW OPEN. Then
press ON to temporarily turn
o heating in case of a sudden
temperature drop in the room
or OFF to let the thermostat
heat during sudden tempera-
ture drops in the room. Press
to conrm.
To return to the normal temperature display, press the back
arrow in the upper left corner of the screen until you get to
the main menu, then press .

Danfoss ECtemp Touch Specifications

General

Temperature sensor	Yes
Control type	Touch
Product color	White
Memory function	-
International Protection (IP) code	IP21
Voltage	220 - 240 V
Power source	AC
Temperature control range	5 - 45 °C

Weight and Dimensions

Depth	24 mm
Package depth	140 mm
Package width	95 mm
Package height	85 mm
Package weight	24 g

Summary

Danfoss ECtemp Touch Introduction

Technical Specifications

Details operation voltage, power consumption, relay specifications, and sensing units.

Safety Instructions

Essential safety guidelines for thermostat installation and operation.

Mounting Instructions

Configuration and Settings

Initial Setup Guide

Guides through initial setup steps for the thermostat.

Forecast Feature Operation

Explains how to use and configure the forecast feature.

Window Open Detection

Details how to enable or disable window open detection.

Maximum Floor Temperature Setting

Instructions for setting the maximum allowed floor temperature.

Device Symbols Explained

Product Warranty Details

Environmental Disposal Guidelines