Danfoss EM-PMI375 - Page 82

Used service parts (continued)
Part description Part type Quantity Item (order) number
_
Notes:
•
•
•
•
•
•
•
•
•
•
•
•
Date:
Signature:
Electric machine storage checklist
Date:
Electric machine and customer information
Customer: Electric machine type (from the rating plate):
Customer reference: Electric machine serial number:
Service reference: Date installed:
This storage checklist is used when storing the electric machine. Regular inspection is required. See
specifications for storage in this User Guide or in the Data Sheet.
Fill in the date of each inspection to the Table below.
Storage checklist
Procedure Date Date Date Date Date
Storage base as
specified (vibration
free)
Storage temperature
and humidity as
specified
Electric machine type
and serial number is
correct
Electric machine
supported correctly
Corrosion protection of
non-painted surfaces
(for example shaft-end
and grounding points)
Shaft rotated as
specified (10 rotations
monthly)
User Guide
EM-PMI375
Storage, installation and maintenance checklists
82 |
©
Danfoss | November 2021 BC265856307805en-000202