User manual ERC 113 refrigeration controller
Application setup
1) ERC 113 stand-alone
2) ERC 113 + remote display
3) ERC 113 + remote spindle
The ERC 113 is an IP-rated stand-alone controller
for use in applications such as beer coolers and
counter-top bottle coolers (e.g. in petrol stations).
With input from multiple sensors, the
cost-efficient controller delivers energy-saving
routines as well as providing control of
compressor, light, fan and defrost functions.
Using the Danfoss docking station, programming
of pre-prepared parameter settings can be
achieved in just ten seconds
The ERC 113 + remote display (RDI 107) is ideal
for commercial freezers and fridges as well as
glass door merchandisers.
ERC remote displays allow for temperature
indication and user interaction alike in an
embedded controller but with the flexibility of a
split system (up to 3 meters cable length)
The ERC 113 + remote spindle provides a
controller solution with the look and feel of
mechanical thermostats, ideally suiting
refurbishment solutions and cost optimized
commercial refrigeration equipment.
The remote spindle wiring is available up to 3
meters length. The spindle offers a stop function
(appliance ON/OFF switch)
4
DKRCC.ES.RL0.F5.02 Produced by Danfoss A/S (ADAP-KOOL®) | 2016-07
To Next Page
Loading...
Need help?
General
