Danfoss GreenCon RC-T2 User Manual

3
Installation Guide GreenCon RC-T2/T4
GB
Danfoss Heating Solutions VIE2D32P
1. Installation Steps
User Guide can be downloaded from: heating.danfoss.com.
1. Installation must be done by an authorised
electrician.
2. The room thermostat should be installed at approx.
1.5 m above oor and where the eects of sunlight,
draught or other heat sources (eg. TV’s) are avoided,
see g. 1.
3. First of all, carefully remove the cover, see g. 2.
4. Connect the wire before mounting the back plate to
the wall box using the enclosed screws. Then mount
the cover to the back plate, see g 3.
2. Wiring
1. Dimensions, see g. 4
2. Wiring diagram, see g. 5 and g. 6
3. Follow the illustrations to complete the wiring:
1) RC-T4, see g. 5
2) RC-T2, see g. 6

Danfoss GreenCon RC-T2 Specifications

General

Brand	Danfoss
Model	GreenCon RC-T2
Category	Thermostat
Language	English