Danfoss Link DBR

6
VIIOS202 © Danfoss 07/2017
Installation Guide Danfoss Link™ DBR
Mounting
The Danfoss Link™ DBR is not recommended in application
without bypass valve. Install Danfoss Link™ DBR together with
e.g. AVDO bypass valve.
If boiler has internal bypass valve and installed with weather
compensation, the Danfoss Link™ DBR can be installed without
the Return Sensor, in operation mode “On when Heat Demand”
Note:
The Danfoss Link™ DBR must be mounted on a at surface.
For mounting the temperature sensor correctly on the pipe
please see enclosed installation guide for ESM-11 Temperature
Sensor.
NL
FR
UK