Danfoss living connect

Code numbers
Code no. Adapter (included) Language instructions
014G0001 Danfoss RA
UK/DE/DK/NL
FR/PL/SE/FI
014G0002 Danfoss RA and M30 x 1.5 (K)
UK/DE/DK/NL
FR/PL/SE/FI
Accessories
Type Code no.
RAV & RAVL adaptor 014G0250
RA adaptor 014G0251
M30 x 1.5 (K) adaptor 014G0252
RTD adaptor 014G0253
Specification
Control system/input Standard Z-Wave control units
Transmission frequency Wireless Z-Wave/868.42 MHz
Transmission range Up to 30 meters
Synchronizing Configurable (5 min. recommended)
Screen/display Grey digital with backlit
Actuator type Electromechanical
Software classification A
Control PID
Power supply 2x1.5V AA alkaline, class III (SELV)
Battery life 2 years
Low battery signal
Battery icon and alarm bell will flash in display. If the battery
level is critical, the whole display will flash.
Ambient temperature 0 to 40⁰C
Transportation temperature range -20 to 65⁰C
Temperature setting range 4 to 28⁰C
Recommended use Residential
Open-window function Yes
Size RA: L: 91 mm Ø:51 mm/K: L78 mm Ø: 51 mm
Noise level < 30 dBA
Weight incl. battery 177 g
Safety classification Type 1
Mechanical strength 70 N (max. force from valve)
Maximum water temperature 90°C
Movement type Linear
Spindle movement 2-3 mm on valve
Maximum extension 4.5 mm
Temperature sampling Measures temperature every minute
Speed of adjustment 1 mm/s
Power consumption 3 mW in standby, 1.2 W when active
Ball pressure test 75°C
IP class* 20
* This thermostat should not be used in hazardous installations or in places where it will be exposed
to water.
Data Sheet living connect®, Z-Wave Certified Electronic Radiator Thermostat
2 VDHMB202 © Danfoss 09/2011 Danfoss Heating Solutions