MAGFLO
7
Specifications
Adapters Stainless steel AISI 316 Pressure
Pipe connection/ Adapter for direct welding into pipe:
Operating
Tri-Clover
ISO 2037, DIN 11850, SMS 3008, BS 4825-1
pressure
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3" 600 psi
4" 350 psi
Clamp adapter:
Tri-Clamp
ISO 2852, DIN 32676, SMS 3016, BS 4825-3
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2" 200 psi
2
1
/
2
", 3", 4" 150 psi
Thread adapter:
DIN 11851:
3
/
8
",
1
/
2
", 1", 1
1
/
2
" 600 psi
2", 2
1
/
2
", 3", 4" 350 psi
ISO 2853, SS 3351, BS 4825-4:
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3", 4" 200 psi
SMS 1145: 1", 1
1
/
2
", 2", 2
1
/
2
", 3" 80 psi
Gasket
Standard
EPDM (ethylene, propylene rubber) (−5 °F to 300 °F)
Option
NBR (nitrile butadiene rubber) (−5 °F to 210 °F)
Material Stainless steel AISI 304, ISO 2852
Type Hygienic sensor
Nominal size
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3", 4"
Process connection Hygienic adapters available for:
♦ Direct welding in ♦ Clamp fitting ♦ Threaded fitting
Operating pressure
3
/
8
"-2
1
/
2
": 600 psi, 3": 560 psi, 4": 450 psi 300 psi
Vacuum
1.5 × 10
-5
psi 0.3 psi
Temperature of medium 0°F to +300°F −20°F to +270°F
Suitable for steam sterilization Suitable for steam sterilization at 300°F
Temperature shock (Duration > 1 min.): Max. ±212°F momentarily
3
/
8
",
1
/
2
", 1" Max. ∆T ≤ 60°F/min.
1
1
/
2
", 2", 2
1
/
2
" Max. ∆T ≤ 50°F/min.
3", 4" Max. ∆T ≤ 40°F/min.
(Duration ≤ 1 min., followed by 10 min. rest):
3
/
8
",
1
/
2
", 1" Max. ∆T ≤ 175°F
1
1
/
2
", 2", 2
1
/
2
" Max. ∆T ≤ 160°F
3", 4" Max. ∆T ≤ 140°F
Ambient temperature Remote mount signal converter: −40°F to +210°F Remote mount signal converter: −40°F to +210°F
Integral mount signal converter: −5°F to +120°F Integral mount signal converter: −5°F to +120°F
Liner Aluminum oxide Al
2
O
3
(ceramic) Reinforced PFA (Teflon)
Electrodes Platinum with gold/titanium brazing alloy Hastelloy C-276
Enclosure Stainless steel AISI 316L (1.4404) Stainless steel AISI 316L (1.4404)
Terminal box
Standard
Fiberglass-reinforced polyamide Fiberglass-reinforced polyamide
(Remote installation only)
Option
Stainless steel AISI 316 (1.4436) Stainless steel AISI 316 (1.4436)
Cable entries 4 pcs. PG 13.5 4 pcs. PG 13.5
Enclosure rating
Standard
NEMA 4X / 6 (3 ft. submersion for 30 min) NEMA 4X / 6 (3 ft. submersion for 30 min)
Option
NEMA 6P (30 ft. continuous submersion) NEMA 6P (30 ft. continuous submersion)
Mechanical load (vibration) 18-1000 Hz random, 3.17 G rms in all directions, 18-1000 Hz random, 3.17 G rms in all directions,
to EN 60068-2-36 to EN 60068-2-36
Test pressure 1200 psi (2 × nominal) 600 psi (2 × nominal)
Approvals 3A, EHEDG 3A
Excitation frequency
3
/
8
" - 2
1
/
2
": 15 Hz
3
/
8
" - 2
1
/
2
": 15 Hz
programmable 3", 4": 7.5 Hz 3", 4": 7.5 Hz
2.2 Sensor MAG 1100 FOOD
MAG 1100 FOOD MAG 1100 FOOD PFA
2. Specifications MAG 1100 FOOD
Accessories
MAG 1100 FOOD
Note
It is always a system so please state system max. pressure and not MAG 1100 or adapter.
To Next Page
Loading...
Need help?
General
