Danfoss MCV104A

1.0
1.0
.75
.75
.5
.5
.25
.25
18
10
-10
-18
Swashplate angle (degrees)
Time (second)
1.0
1.0
.75
.75
.5
.5
.25
.25
18
10
-10
-18
Swashplate angle (degrees)
Time (second)
High response Non-high response ED
C
INTERNAL WORKINGS SCHEMATIC, WITHOUT OPTIONAL PRESSURE
Time vs. Swashplate Angle For Annular and Non-Annular EDCs, Run Full-To-Full With a Step Input. EDCs Run Into 1000 PSI Load
PERFORMANCE
Schematic of the Internal Workings of the MCV104A Without Optional Pressure Override Valve.
Oil Paths Shown Externally For Clarity.
TIME VS. SWASHPLATE ANGLE
1303
1301
RATED CASE AND OPERATING PRESSURE
40 psi
RESPONSE TIME
See Table C.
MAXIMUM HYSTERESIS
4% of peak to peak current excursion
NOMINAL FREQUENCY RESPONSE (Series 22 pump without
STEP RESPONSE
See Time vs. Swashplate Angle.
DIMENSIONS
See Dimensions and Pump Mounting.
© Danfoss, 2013
K07116 • Rev AB • September 2013
8