Danfoss OSQA - Priority Valve Spool Assembly

4. Push locking ring (39) into position.
a) Place locking ring into the recess with ends facing away from pin holes.
Assembling priority valve spool
The priority valve spool has throttle/check valve (4) and orifice, dynamic (11).
1.
Screw in orifice, dynamic (11) using a 4 mm
Hex key and a multigrip pliers, 5 ± 1 N·m.
Service Manual
OSQA/OSQB
Assembly
28 |
©
Danfoss | July 2016 HN25D293 | AX00000127en-US0101