c)
Screw in remaining six screws (81) with washers (80) using a 13 mm socket spanner, 25 ±
5 N·m [221 ± 44 in·lbf] or 80 ± 10 N·m [708 ± 89 in·lbf] for the 10 mm Hex key.
Plastic plugs
Place or screw in the plastic plugs after testing or if storage is needed between assembly and testing.
Plastic plugs placed or screwed into ports
Service Manual
OSQA/OSQB
Assembly
©
Danfoss | July 2016 HN25D293 | AX00000127en-US0101 | 39
To Next Page
Loading...
General