Balancing of
the basic
project
(continued)
3. In order to minimize power losses in the project,
PFM 5001 starts balancing with a 3kPa pressure drop
on the balancing valve in the last branch. Next, the
non-balanced branches are optimized. If for any branch
a higher pressure drop is required on the balancing
valve, the computing will be restarted with an
increased pressure drop in the last branch. The
balancing stops when the minimum number of
branches is not balanced.
4. The result of the balancing
appears in the Results
window on the Start
Balancing window.
HEC 39
To Next Page
Loading...
Need help?
General
