Danfoss PTU 025 Installation Instructions

Items Supplied
See Illustration 1.1 for the list of supplied items.
1 M25 nut 5 Pressure Transmitter Unit PTU 025
2 M25 ground washer connection 6 Tube relief plate
3 M25 star washer 7 Interface cable for the C-option port
4 M25 gasket 8 Cable binders
Table 1.1
Illustration 1.1 Pressure Transmitter Unit PTU 025 and Items Supplied
Installation Instructions
Pressure Transmitter Unit PTU 025
VLT
®
HVAC Drive FC 102
Danfoss A/S © 12/2017 All rights reserved. MI08A102

Danfoss PTU 025 Specifications

General

Supply voltage	24 VDC
Rated current	25 A
Output voltage	0-24 VDC
Protection class	IP20
Control signal	0-10 V, 4-20 mA
Protection	overtemperature